Page-1


Page 1 of 1
Intel ProCam provides live video from internal camera or cameras anywhere in the premBullet Cam. Weatherproof NTSC compat video - brought into the C2Home Srvr via IntelPro Cam - X.10 controls which camera is onBullet Camera: Weatherproof NTSC compatible video - this one is brought into the C2Home Server via the Axis Cam ServerDev B10: X.10 Wireless PIR detector - very inexpensive and simple to install. DEV B11: X.10 Wireless PIR detector - very inexpensive and simple to install. Dev. B9:Wireless Interface - Provides an interface between the X.10 wireless network and a conventional X.10 networkEthernet HUB - Interconnects PC and other Ethernet componentsAXIS Camera Server : Converts live video to HTML feed, accessed by Server for live video feeds or event driven frame captureBall Camera. Weatherproof NTSC compatible video - this one is brought into the C2Home Server via the Axis Cam ServerBall Camera. Weatherproof NTSC compatible video - via IntelPro Cam - X.10 controls which camera is on via cam powerDev B6: Floodlight with build in PIR Sensor and X.10 compatible controller - Autoturn on, and signals the Base of eventPressure Mat detects weight on carpets or floors- this config opens the circuit on eventMagnetic Reed Sensors detects open windows or doors - this config opens the circuit on eventMagnetic Reed Sensors detects open windows or doors - this config opens the circuit on eventPIR Sensor detects warm bodies in the sensed zone - this config opens the circuit on eventCM11A device connects to Server Serial Port and provides PC access to the X.10 network over house wiringDev. B4:Lamp Control - Uses to turn lamps ,or in this case cameras - on/off via X.10 controlDev. B4:Lamp Control - Uses to turn lamps ,or in this case cameras - on/off via X.10 controlDev. B1:Powerflash Interface - sends X.10 event signal to PC when contacts are open or closedDev. B3:Lamp Control - Uses to turn lamps or otherdevices on/off or dim/bright via X.10 controlDev. B2: Universal Interface - Just like closing a switch via X.10 controls - This one is used for an Audible Alarm Signal